Pinterest Offical Page : Amigurumipattern.picpin.pro
Facebook Group: Amigurumipattern.picpin.pro
Facebook Offical Page: Amigurumipattern.picpin.pro
Santa’s height in finished form is 36 cm to the top of the hat.
For knitting you need:
– knitting needles 3 mm,
– yarn of the right colors,
– filler. FEET, BODY, HEAD.
Starting from the bottom edge of the leg and using black yarn, type
1st row: add in each loop = 58 loops. Beginning with
purl the back row to knit with stocking stitch 17 rows. *
We form the top of the foot:
1- Row: 6 knit, (2 knit together) 18 times, 16 knit = 40 loops.
3- Row: 4 knit, (2 knit together) 12 times, 12 knit = 28 loops.
** Next we knit 11 rows of hosiery.
Next row: 3 knit, (increase, 6 knit,) 3 times, increase, 3 knit, = 32
Track row: purl warp loops. Tear off the black thread and
attach red for pants. Knit 14 rows of hosiery
viscous. *** Tear off the thread and leave on the spare spoke.
Do the same job until *
We form the top of the leg.
Next row: 16 knit, (2 knit together) 18 times, 6 knit = 40 loops.
Track row: purl warp loops.
Next row: 12 knit, (2knit together) 12 times, 4 knit = 28 loops. And now
do the same job as indicated for the right leg from **
Now we will combine the details of the legs: for this we knit 32
stitches with knit left legs, then 32 stitches with spare knitting needles
right foot = 64 loops. Next, we knit 29 rows of stocking viscous.
We form the sides:
Next row: 12 knit, (2knit together) 5 times, 20 knit, (2knit together) 5 times,
12 knit = 54 loops. Next, hosiery 7 rows.
Next row: 12 knit, (2knit together) 3 times, 28 knit, (2 knit together) 3
times, 12 knit = 48 loops. Next, hosiery 5 rows.
Shaping the neck:
Trail row: (1knit, 2knit together) to the end of the row = 32 loops
Tear off the red thread and attach the flesh for the knit.
Hosiery 3 rows.
Add in each loop = 64 loops.
We knit 33-row hosiery.
We form the top of the head:
Track row: (2 knit, 2knit together) to the end = 48 loops.
Track row: (1 knit, 2 knit together) to the end.
Track row: purlanochka.
Track row: (2knit together) to the end of 16 loops.
Leave the long end of the thread, assemble the loops on the thread, but do not
Sew side seams on the feet, legs and body. Better to sew with
left side seam over the edge. You can insert cardboard into the legs
like tracks. (I did not insert, because without cardboard the legs are more like
on boots). Tightly stuff the toy through the non-wired part
I stuffed over my head, because. then the outer seam will be
subsequently under the hood and it will not be visible.
After everything is stitched and stuffed, you need to form a neck.
With a double thread of flesh-colored thread through each needle
loop and tighten and tighten the knot.
We do everything carefully so that no ends of the thread and knots are not
was seen. The toy must be equally carefully made
both front and rear. Next, embroider the eyes, the mouth.
Mark the position of the eyes with pins, placing them at 20
rows above the incremental row for the head and leaving 4 loops
between the pins.
Black yarn embroider eyes like this:
– stretch the needle to one marked location of the eye,
pull the needle through the knito 2 rows below the first position,
pull back to the first position, do 4 more stitches,
fasten the thread. Embroider the second eye.
I still made eyebrows.
Using flesh yarn, dial 5 loops and knit one
Next row: increase in each loop = 10 loops
Starting with the purlanke knit 7 rows.
Track row: (2knit together) = 5 loops. Loop and fasten the hinges.
Pokraste turned out a piece of red pencil.
Using the end of the thread, collect the loops in a circle. Stuff and Loops
pull off. Sew the resulting ball into place,
focusing on the drawing.
HANDS (2 identical parts)
Start from the end of the hand and use flesh color to dial 12
Track row: purl
Next row: 24 loops added to each loop
Starting with the purl of the knit, knit in 11 rows.
Next row: 7 knit, (increase, 2knit together) 4 times, 5 knit = 28 loops.
Tear off the body thread and attach the red one for the sleeve.
Starting with a purl of 25 rows, knit
Form the top of the sleeve:
Reduce one loop at the beginning of the next and all
subsequent rows until 6 stitches remain.
Sew the sleeve over the edge of the left side with a seam, turn on
right side, fill with filler. Hands not yet
to sew, until the hem of the jacket is sewn.
Then sew open edges of the hands to the sides of the jacket 1 cm lower
the edges of the neck.
SLEEVE CUFF (2 parts)
Using white yarn, dial 30 loops. Beginning with
purl the back row knit 7 rows of garter stitch. Hinges
Stitch the ends of the row of each cuff together on the left side.
Turn to the right. Sew cuffs around the bottom
the edges of the sleeves.
The inside of the beard
Start knitting from the bottom edge and dial 12 loops. All over
the length of the beard knit with a garter stitch. Pay attention: 1st
The row is the right side of the part.
Next row: add at the beginning of the first and subsequent rows to
as long as there are 42 stitches on the spoke.
Shawl-13 rows. *
Do the same work as with the inside before *
Mark each end of the last row with colored thread.
Knit with a garter stitch 2 rows.
Next row: 8 knit, knit turn, knit with a garter stitch 13
rows only on these 8 loops. Hinges to close. Join
white yarn to the remaining 34 loops and close the center 26
loops. Knit the remaining 8 stitches with knit stitches. Handkerchief
knit 13 rows and close the stitches.
Connect the inside and outside of the beard with the right
sides out. The inner part of the db at the level marked
colored threads on the main part of the beard. Sew the edges together
lightly fill with stuffing. Attach a beard with pins to
knitu so that the closed loops of the main part of the beard are
under the nose. Sew a beard to a knit.
Mustache (2 parts)
White yarn dial 6 loops. Knit a garter stitch
adding one loop at the beginning of the first and the next
row until 16 loops appear on the spoke.
Next row: Reduce one loop at the end of the next and
subsequent rows until 2
loops. Loop and fasten the hinges.
Sew along the edges of the ends of the row of each piece together. Make
front seam stitching both mustaches together. Sew a mustache to a knit so
so that the central seam is under the nose. Sew a mustache to
beard, knit, focusing on the picture.
Using white yarn dial 82 loops and knit hosiery
viscous 7 rows, starting with the purl number. Interrupt white
thread and then knit red thread 24 rows.
We form the top of the cap
1st row: 1 knit, (2 together knit, 14 knit) to the last loop, 1 knit
= 77 loops
2nd row and all even rows – purlano.
3rd row: 1 Knit, (2 vm. Knit., 13 Knit.) – repeat until
1 loop will remain and knit it. – it turns out 72 loops.
5th row: 1 Knit, (2 cm Knit., 12 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 67 loops.
7th row: 1 Knit, (2 cm Knit., 11 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 62 loops.
9th row: 1 Knit, (2 kn.Knit., 10 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 57 loops.
11th row: 1 Knit, (2 vm. Knit., 9 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 52 loops.
13th row: 1 Knit, (2 vm. Knit., 8 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 47 loops.
15th row: 1 Knit, (2 vm. Knit., 7 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 42 loops.
Hosiery 3 rows.
Next row: 1 Knit, (2 knm., 6 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 37 loops.
Hosiery 3 rows.
Next row: 1 Knit, (2 VM Knit., 5 Knit.) – Repeat until
1 loop will not remain and knit it. – it turns out 32 loops.
Hosiery 5 rows.
Next row: 1 Knit, (2 kn.Kit., 4 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 27 loops.
Hosiery 5 rows.
Next row: 1 Knit, (2 kn.Knit., 3 Knit.) – repeat until
1 loop will not remain and knit it. – it turns out 22 loops.
Hosiery 30 rows.
Next row: (2 vm Purl.) – repeat to the end of the row – get 11
Change red yarn to white for a pompom on a cap.
Next row: From each loop, knit 2 knit. – it turns out 22
Starting with Knit. we knit a row of hosiery knitting 12 rows.
Next row: (2 cm. Knit.) – repeat to the end of the row – it turns 11
loops. Pull the thread through the remaining loops and tighten it tightly,
Sew together over the edge the ends of all rows of knitted knit. from
bottom edge. Connect all other ends of the rows. Turn on
knitо. Fill the pompom, gather the last row in a circle
knitted with red thread over the pompom. Pull tightly and
fasten the thread. Fill a very slightly narrow part at the top
cap. Fold up to the knit side of the hood, edge
all ranks related knit.
Place the cap on the head with a seam in the back in the center, only
above the neck. The front cap should be above the eyes. Bend
down edge, from rows knitted in all rows knit
loops. Sew the cap to the head through the last row
knitted in stocking viscous white yarn. Bend again
up the edge of the rows knitted in all rows of Knit. and
lock the set edge to the last row of knitted
hosiery viscous white thread. Tie oak leaves and berries (
description below) and sew as decoration on Santa hat.
Bend the narrow part of the cap and sew it to one of the side
sides of the head.
Upper boot trim for Santa
White yarn dial 40 loops.
We knit 7 rows with knit stitches.
Close the loop.
Arrange each detail in a circle at the top of each boot
and sew together the ends of the rows from the back. Sew on
typed and closed edges to the boots.
The bottom of Santa’s jacket.
We start from the bottom edge, we collect 96 loops with white yarn.
We knit 8 rows with knit stitches.
Starting with the purl number, we knit hosiery 6 rows.
We cut off the white yarn and attach the red, knit
hosiery 15 rows.
Decrease for the waist
Next row: (2 knit, 2 vm.knit) – repeat to the end of the row,
it turns out 72 loops.
Now change the red yarn to black for the belt.
Purl warp loops next 2 rows.
Starting with purl. a series of stocking viscous 6 rows.
Close the loop.
Sew together the ends of the rows, then turn them on a knit
Fold up the border, from all the rows of knit., To
knit the side of the part and sew the hem around
the last row knitted with white yarn, hosiery.
Place the part on Santa’s torso so that the seam is at the back
in the center. Pin the closed edge to the body, 6 rows
below the first side, forming a row on the body. Sew on
closed edge in place as attached.
Take the yellow yarn in two folds and collect 28 loops.
Break one thread and close the loops. Take the yarn in one
addition, sew together the ends of the rows. Sew in front on
Now you can sew Santa’s hands.
Oak leaves. (for Santa and for Mrs. Klaus)
Green thread to dial 16 loops.
1st row: 7 purl, add a loop in the next 2 loops, 7 purl –
it turns out 18 loops.
1 row knit.
Finished the top of the sheet, and proceed to the edge of the picot
Next row: 1 knit, (double crochet, 2 vm.knit) – repeat 8 times, 1 knit.
Starting from knit.ryad, stocking 2 rows.
Next row: 7 knit, (2 vm. Knit) – repeat 2 times, 7 knit.-
it turns 16 loops.
Close the loop.
Fold the sheet with a pico edge on the knit side, stocking
out. Sew over the edge of the dialed and closed loops onto
bottom side of the sheet. Gather the ends of the row tightly and secure.
Red thread tightly dial 12 loops. Starting with purl
row, hosiery 2 rows. Close the loop tightly.
Firmly roll the knit side of the hosiery out
a strip from the beginning of the typed edge to the end of the typed edge.
Sew over the edge of the ends of the rows into place. Now collect the thread
around the outer edge from one end of the rolled shape, strongly
pull and fasten. Repeat from the other end.
Start at the top edge of the brown yarn to dial 32 loops.
Knit all rows knit – 4 rows.
Starting with knit. row, continue hosiery and knit until
the part will not become 24 cm in size, the last row should be
Knit all rows knit – 4 rows.
Close the loop.
Bend the strip, connecting together the typed and closed edges.
Sew together the ends of the rows on each side. Turn on
Make a separate twisted cord at 46cm, matching the color of the bag.
Pass it through the bound singing at the top of the bag, only
below all the knit stitches.
Tie the ends together.
It will take a regular plastic drinking straw about
3mm. In diameter.
White yarn dial 22 loops. Starting with purl. a number of hosiery
viscous – 4 rows. Close the loop.
Cut 8cm from the straw. Knit stitches on knit stitch
over the edge, the typed and closed edges of the connected strip,
investing 8cm. a straw, how to sew.
SANTA is ready!